It is vital to be prepared for a home inspection. So you’ve advertised your house, found a buyer, and agreed on a price. Your house is almost sold, but it’s not quite time to pack the moving boxes yet — you still have to pass the home inspection. We shall guide you with your Atlanta home inspection with our Home Inspection information.

If you need directions, pointers and guidance for Home Inspection Atlanta, from a Buyers’ and Seller’s perspective, then check out one of our articles about it:

https://crimsonhomeinspection.com/home-inspection/home-inspection/

Without further ado, let’s begin with our Home Inspection information guide.

 

Allow full access to locations that need to be examined.

Make sure the house inspector has easy access to the whole property. If he can’t access a location, he can’t check it, which is a red signal for purchasers.

 

Clear the perimeter

In addition to checking the interior of your home, the inspector will also check the exterior. This will include siding, trims, and caulking around windows and doors.

 

Check the roof

Clean moss and debris from the gutters with a ladder, inspect for broken or missing tiles and ensure downspouts are in the appropriate place.

 

Keep a clean house

The cleanliness of your home has no bearing on the inspection, but a dirty or messy house may make the inspector suspect that other sections of the property aren’t being properly cared for as well. With this Home Inspection information you can make your house presentable.

 

Replace any bulbs that are out

A dead bulb indicates one of two things to a home inspector: either the bulb is broken or an issue with the fixture’s wiring. Make sure that all of your bulbs are in functioning order to avoid both of these possibilities.

 

Make sure your toilets are functioning properly

Fixing a running toilet is simple and a cheap repair. You can go yourself to the hardware store, so take care of the issue before the inspection.

 

Put in a new furnace return filter

It is important to replace the furnace filter in your house regularly to ensure good air quality and the proper operation of your heating system. Instead of worrying the inspector that you haven’t been taking excellent care of your home’s heating and air conditioning, clean or replace the current filter to demonstrate that you do.

 

Turn all pilot lights on

Because many homeowners switch off their fireplaces during the summer, it’s critical to double-check the pilot light and the fireplace itself – are both operational before the inspection. If you’ve shut off your fireplace’s pilot light, it’s time to relight it.

 

Ensure the fuse box is properly labelled

A perplexing fuse box is a source of frustration for both homeowners and house inspectors. Check that each switch in the box is clearly and accurately labelled and replace erroneous or difficult to read.

 

Check your doors

Examine each door to ensure that it is in good functioning order. Interior and outdoor doors should latch securely into the frame, doorknobs should be firmly in place, and any locks, particularly on doors leading outside, should work correctly.

 

 

Repair faulty cabinets

Cabinet hinges can become a little slack over time, doors that don’t shut properly or aren’t flat with the frame. If you have a cabinet that isn’t looking right, you can typically fix it by tightening the hinge with a screwdriver.

 

Look for leaks and water damage

The house inspector will undoubtedly be searching for evidence of leaks or water damage, so it’s best if you get ahead of them and remedy any water-related concerns before the inspection. In the case of water damage, inspect the walls, ceilings, and floors for evidence of warping, sagging, or buckling.

 

Take care of any bug problems

Most of us have to deal with a rogue ant or spider in the house from time to time, especially in warmer weather. However, if you have a wasp nest in your garden or notice lines of ants in your kitchen or other inside places daily, you should consider these issues before the inspection. Most bug issues are minor, yet they might put off purchasers.

 

Be ready on the day of the inspection

Our Home Inspection information creates an ideal guide. It would be best if you had done all possible tasks to prepare for the house inspection by the day of the inspection. Now it is a matter of making sure everything runs as smoothly as possible. Keep all utilities turned on. Double-check that you’ve left clear access to all locations and systems around the house, and open any gates, electrical boxes, or other spots that you typically keep secure. Most importantly, come at least two hours before the inspector is scheduled to arrive (they’re notorious for being early), and prepare yourself and your family to exit the house for the inspection. It’s preferable if you can bring your pets, but if you can’t, make sure they’re properly crated or otherwise secured.

 

Take a big breath at this moment. Most purchasers aren’t looking for perfection; they want to know that there aren’t any major stumbling blocks in their way. It’s typical for the house inspector to point up a few small flaws, but most of the time, if there’s something important to look for, you’ve already discovered it on your own.